CVE编号
CVE-2020-1684利用情况
暂无补丁情况
N/A披露时间
2020-10-17漏洞描述
On Juniper Networks SRX Series configured with application identification inspection enabled, receipt of specific HTTP traffic can cause high CPU load utilization, which could lead to traffic interruption. Application identification is enabled by default and is automatically turned on when Intrusion Detection and Prevention (IDP), AppFW, AppQoS, or AppTrack is configured. Thus, this issue might occur when IDP, AppFW, AppQoS, or AppTrack is configured. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D221, 15.1X49-D230; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2.解决建议
建议您更新当前系统或软件至最新版，完成漏洞的修复。
参考链接 |
|
|---|---|
| https://kb.juniper.net/JSA11081 |
受影响软件情况
| # | 类型 | 厂商 | 产品 | 版本 | 影响面 | ||||
| 1 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 运行在以下环境 | |||||||||
| 应用 | juniper | junos | 18.2 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | alpine_3.12 | go | * |
Up to (excluding) 1.13.15-r0 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | alpine_3.13 | go | * |
Up to (excluding) 1.15-r0 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | alpine_edge | go | * |
Up to (excluding) 1.15-r0 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | amazon_2 | go | * |
Up to (excluding) 1.13.15-1.amzn2.0.1 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | amazon_AMI | go | * |
Up to (excluding) 1.13.15-1.59.amzn1 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | centos_8 | go1.14 | * |
Up to (excluding) 1.3.2-3.module+el8.2.0+5581+896cb53e |
|||||
| 运行在以下环境 | |||||||||
| 系统 | debian_10 | go | * |
Up to (excluding) 1.11.6-1+deb10u4 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | debian_9 | go | * |
Up to (excluding) 1.7.4-2+deb9u2 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | fedora_31 | go | * |
Up to (excluding) 3001.3-1.fc31 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | fedora_32 | go | * |
Up to (excluding) 3001.3-1.fc32 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | fedora_33 | go | * |
Up to (excluding) 3002.1-1.fc33 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | fedora_EPEL_6 | go | * |
Up to (excluding) 1.15-1.el6 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | fedora_EPEL_7 | go | * |
Up to (excluding) 1.15-1.el7 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | opensuse_Leap_15.1 | go | * |
Up to (excluding) 1.14.7-lp151.13.1 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | opensuse_Leap_15.2 | go | * |
Up to (excluding) 1.14.7-lp152.2.3.1 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | oracle_7 | go | * |
Up to (excluding) 19.03.11.ol-5.el7 |
|||||
| 运行在以下环境 | |||||||||
| 系统 | oracle_8 | go | * |
Up to (excluding) 1.13.15-1.module+el8.2.0+7788+3ff8dc7f |
|||||
| 运行在以下环境 | |||||||||
| 系统 | redhat_8 | go1.14 | * |
Up to (excluding) 1.3.2-3.module+el8.2.0+5581+896cb53e |
|||||
- 攻击路径 网络
- 攻击复杂度 低
- 权限要求 无
- 影响范围 未更改
- 用户交互 无
- 可用性 高
- 保密性 无
- 完整性 无
还没有评论，来说两句吧...